Our Top 10 Recommendations for Hitachi Air Compressors

Up-to-date pricing and reviews for hitachi air compressors on the market

Bestseller No. 1

Reference OEM Numbers: LR023964 / LR015303 / LR044360 / LR045251 / LR061663 / LR072537 / YWB500220
Fits for: 2006-2013 La-nd Rover Range Rover Sport; 2005-2009 La-nd Rover LR3; 2010-2013 La-nd Rover LR4. Does NOT fit the L322 / VOGUE Models. Hitachi air suspension compressor fitted from VIN: Discovery 3/LR3 - 5A000360 to 9A513325; Discovery 4/LR4 - AA513326 to CA638964; Range Rover Sport - 5A900302 to 9A215622
The air suspension compressor pump uses the increasing rigidity of the compressed air in the air spring, that is, as the air spring is continuously compressed, its stiffness gradually increases, and at the same time, its internal gas is compressed into or discharged as the air spring is compressed or elongated, making that the air suspension system has nearly ideal dynamic elastic properties.
This Brand New after market air suspension compressor is made of high quality components, replaces the original air compressor of your car and equal the original quality. Professional installation is recommended.
There are two types of air suspension pumps. One is with HITACHI system and the other is with AMK system. This listed pump only fits for HITACHI style (6 pins connector), not for AMK version. Please make sure it fits yours before purchasing.

Bestseller No. 2

★100% brand-new, never ever been utilized, all parts are tested and quality controlled prior to shipment
★Compatible with: (Replaces Hitachi 882-609) Fits Models: EC12 , EC129 , EC10 , EC119, EC79 & Others
★Fits Models: EC12 , EC129 , EC10 , EC119, EC79 & Others Cuts in at 95psi - Cuts out at 125psi and can be Adjusted ; 4 Port W/ Push - Pull Switch Replaces Hitachi 882-609.
★1/4" NPT Ports. 1/4" Quick Compression fitting for check valve line 20amp @ 120vac - 10amp @ 240vac.
★Package included: 1 x Air Compressor Pressure Switch as pictured

Bestseller No. 3

Bestseller No. 4

Replaces Hitachi 885426 for EC2510E Gas Compressors 110 - 140 PSI Made in USA
Check valve /Unloader valve / Pilot valve all in one - (continuous run unloader) for gas & electric powered air compressors
110 - 140 PSI factory setting. pressure can be adjusted 30-40 psi up or down
1/2" Metric Flare TOP Inlet x 3/8" Male Pipe Thread outlet to air tank
30 scfm Rating ! Pressure can be adjusted 30-40 PSI Higher or Lower. If pressure adjustment is needed, Please see Pic attachment for adjustment instructions.

Bestseller No. 5

Is your vehicles air suspension rising slowly, noisily, or perhaps failing to rise at all? EAS Amber light lit? Fault code C1A20, C1A1364, C50, or C1A20-64 showing? One or more of these errors: “Suspension error only normal height available” “Suspension fault; pressure not rising quick enough” Or “Pressure does not decrease when venting gallery”? VEHICLES AFFECTED: Discovery MK 3 (LR3) 2005-2009 Discovery MK 4 (LR4) 2010-2012 Range Rover Sport 2005-2013 Range Rover L322 2006-2009
THE SOLUTION: Fit our improved design dryer end cap, piston seal, glide seal and filter kit and restore your compressor to full health. Our complete kit includes all needed to restore your compressor to full health. Our kit includes a new improved design glide ring and piston ring, constructed to the finest of tolerances from improved materials to restore full output. Also included is two custom tools to allow easy replacement of these seals.
Full filter replacement kit to allow you to replace all filters and drying beads within the drier unit, the original filters saturate quickly and drastically effect output, our improved replacements will solve this problem. This kit includes a new improved design dyer end cap, re-designed and engineered to not fail again. A simple straight swap for the old dryer end cap. Made from billet aluminium with a Viton seal to provide a perfect long lasting seal with the dryer canister.

Bestseller No. 6

Same tools. New name. Hitachi Power Tools has renamed to Metabo HPT
Ultra-quiet operation at only 59 dB's: so quiet that a normal conversation can take place while the compressor is cycling and the compressor sound is barely noticeable
Steel roll cage with rubber grip protects all critical components and provides comfort during transport
Quiet industrial oil -free pump provides high durability with no maintenance
Industrial regulator and gauges allow for easy and accurate PSI adjustments

SaleBestseller No. 7

MOTOR: 15 Amp direct drive induction motor for efficient and reliable performance
PUMP: Cast iron, oil lubricated pump for cooler operation and greater longevity
LIGHTWEIGHT: Only 52.9 lbs for easy jobsite transport
REGULATOR: Locking regulator ensures the proper pressure is delivered to your tool
GAUGES: Industrial air pressure gauges, encased in steel for higher durability

Bestseller No. 8

COMPRESSOR: 6-Gallon pancake style tank delivers reliable and rugged performance
PSI: 150 PSI of max working pressure for longer run times
RUN MULTIPLE NAILERS: 2.8 CFM delivered at 90 PSI to operate multiple nailers depending on the application
MOTOR: 1-HP oil-free high efficiency motor for reliable startups even in cold weather
PROTECTION: Steel roll cage with rubber grip protects all critical components and provides comfort during transport

SaleBestseller No. 9

MORE PRESSURE: At 200 PSI, this compressor offers 25% greater PSI than a basic pancake compressor
30% MORE AIR FLOW: 4 CFM @ 90 PSI allows for multiple large body nailers to be used on a single compressor
VERSATILITY: Simultaneously runs 2 framing nailers or 2 roofing nailers or 2 siding nailers or 3 finish nailers or 5 brad nailers
PRODUCTIVITY: Consistently drives nails flush with no delay
LIGHTWEIGHT: At only 41 lbs, it is 22% lighter compared to a traditional twin-stack compressor

SaleBestseller No. 10