Our Top 10 Recommendations for Air Compressor Water Separators
Up-to-date pricing and reviews for air compressor water separators on the market
Bestseller No. 1
3 STAGE, HEAVY DUTY INDUSTRIAL GRADE FILTER REGULATOR COALESCING DESICCANT DRYER SYSTEM FOR COMPRESSED AIR LINES, METAL BOWLS, GREAT FOR PAINT SPRAY AND PLASMA CUTTER (3/4" NPT, MANUAL DRAIN)
- 3/4" NPT, INDUSTRIAL RATED 3 STAGE COMBO WATER FILTER/ PRESSURE REGULATOR/ COALESCING FILTER/ DESICCANT DRYER SYSTEM, WITH WALL MOUNTING BRACKET AND MANUAL DRAIN STAGE 1
- 225 PSI MAX INPUT. THIS UNIT WILL REGULATOR YOUR INCOMING AND OUTGOING AIR PRESSURE WHILE REMOVING MOISTURE WATER, MOISTURE VAPOR AND OIL FROM YOUR COMPRESSED AIR LINES, THEN FINALLY DRYING OUT THE SUPER CLEAN AIR WITH AN IN-LINE DESICCANT AIR DRYER
- STAGE 1: WATER TRAP FILTER / PRESSURE REGULATOR. EQUIPPED WITH 5 MICRON ELEMENT TO REMOVE 95% OF THE INITIAL MOISTURE AND DEBRIS FROM YOUR COMPRESSED AIR LINE. REGULATOR ADJUSTS PRESSURE FROM 7 TO 215 PSI. 5oz METAL BOWL WITH VISIBLE SIGHT GLASS.
- STAGE 2: COALESCING FILTER ALSO KNOWN AS OIL REMOVING FILTER ARMED WITH A 0.01 MICRON ELEMENT THAT REMOVES 99.98% OF MOISTURE, MOISTURE VAPOR AND OIL THAT MADE ITS WAY PAST YOUR STAGE 1 FILTER. 5oz METAL BOWL WITH VISIBLE SIGHT GLASS. RED INDICATOR POPS UP WHEN TIME FOR FILTER CHANGE.
- STAGE 3: DESICCANT AIR DRYER, DRIES OUT YOUR SUPER CLEAN AIR BEFORE GOING DOWNSTREAM TO YOUR AIR TOOLS. USES 5oz DESICCANT BEADS IN THE BOWL. BEADS TURN FROM BLUE TO PINK WHEN TIME TO CHANGE. COMES WITH 2 BAGS OF DESICCANT BEADS.
Bestseller No. 2
NANPU 3/8" NPT Compressed Air Filter Regulator Lubricator Combo Water/Oil Trap Separator - Gauge(0-150 psi), Poly Bowl, Semi-Auto Drain, Bracket - 3 in 1 Two Unit
- 3/8" NPT Piggyback Filter Regulator Lubricator Unit
- Operating Pressure: 0-145 PSI
- 5 Micron Brass Filter Element, Excellent Filtering Performance, Much Longer Life and Reuse Feasibility
- Flow Rate: 60 SCFM (1700 L /Minute)@ 90 psi
- Includes Semi-Auto Drain & Polycarbonate Bowl with Metal Guard, 0-150 Gauge & Bracket，a pair of Air Coupler＆ Plug Kit, 2 x 3/8" NPT Fittings, 1 x Thread Seal Tape
SaleBestseller No. 3
Hromee 1/4 Inch Air Compressor Filter Regulator Combo, Water Oil Separator with Pressure Gauge, Manual Drain, Ball Valve and Bracket AW2000-02
- AIR FILTER - Filtering moisture and fine particles to get clean and dry air which prevents damage to air tools, spray guns and pneumatic equipment.
- PRESSURE REGULATOR - With the adjustable pressure control knob, you can pull up and turn the black knob at the top of the regulator to set desired pressure. No matter the size of the inlet pressure and flow fluctuations, always maintain a stable outlet pressure.
- GAUGE&FILTER CUP - The pressure gauge is more accurate to the pressure induction and the metal shell is resistant corrosion. The dial scale has two units of measurement: psi and mpa. The Max pressure is 150 PSI. The filter cup is designed to be transparent for observing the volume of water and oil.
- EXTRA ACCESSORIES - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control. Some necessaries are also included in this kit: a double MNPT fitting and a thread seal tape.
- PIGGYBACK- Air pressure regulator combines the functions of both air filter and regulator. It is compact and much effective when space is constrained. The bracket is designed to provide a secure way to mount a filter regulator and easy removal.
Bestseller No. 4
1/2" Particulate filter water trap seperator moisture Compressed Air Compressor
- 1/2" NPT PARTICULATE FILTER / WATER TRAP TO REMOVE MOISTURE FROM COMPRESSED AIR LINES.
- THIS UNIT HAS 5oz POLYCARBONATE BOWL WITH METAL BOWL GUARD. 5u MICRON FILTER REMOVES 95% OF MOISTURE AND DEBRIS.
- 175 PSI MAX INPUT PRESSURE, 145 MAX OUTPUT PRESSURE, 106 CFM FLOW RATE. PLEASE NOTE::: 1/2" NPT MEASURES 0.850" OUTSIDE THREAD DIAMETER IN INCHES::::
- COMES WITH A SEMI AUTOMATIC DRAIN THAT ACTS LIKE AN OVERNIGHT DRAIN. WHEN PRESSURE IS APPLIED TO THE BOWL, THE DRAIN WILL HOLD THE MOISTURE CONTENTS UNLESS YOU MANUALLY DISCHARGE IT. WHEN NO PRESSURE IS APPLIED TO THE BOWL, THE DRAIN AUTOMATICALLY OPENS TO RELEASE THE MOISTURE.
- REPLACEMENT FILTERS CAN BE FOUND ON AMAZON. ASIN B01MTC8AAH. COPY PASTE ASIN TO YOUR AMAZON SEARCH BAR.
Bestseller No. 5
HEAVY DUTY INDUSTRIAL RATED HIGH FLOW PARTICULATE FILTER, IN-LINE WATER TRAP FOR COMPRESSED AIR LINE SYSTEMS, 5 MICRON WITH METAL BOWL AND AUTO DRAIN (3/4" NPT, 5oz)
- HEAVY DUTY 3/4" Compressed air line Filter seperator/Particulate Filter
- 3/4" Female NPT Air Inlet port X 3/4" Female NPT Air Outlet port
- With Internal Float Drain 140 CFM Flow Rate
- 175 Max Output pressure 175 PSI Max Input pressure
Bestseller No. 6
Water Oil Separator Filter Airbrush Filter Moisture Separator for Air Line Compressor Fitting, 1/4 Inch NPT Inlet and Outlet (3)
- What you get: you will receive 3 water oil separators, the blue end (concave) is the "outward" side of the airflow, and the connector side (convex) is the inlet for the airflow, they are easy to install and ergonomically designed for your convenience and ease of use
- General import export :standard universal male and female 1/4 inch NPT inlet and outlet designs make it easy to connect pneumatic lines to pneumatic tools and airbrush to accommodate most pneumatic tools for convenience
- Sturdy material: the water oil separator is made of polycarbonate housing, aluminum valve body and solid brass fittings, it has good anti-oxidation performance, which greatly improves the durability and reliability of the tool and prolongs its service life
- Extend tool life: clean air is essential in pneumatics, this filter can not only be applied as a water separator for air compressors, but also effectively trap oil and dust, so only clean air can lead to pneumatic tools; Greatly reduce the disposal of worn airbrush and other pneumatic tools, effectively extending the life of pneumatic tools
- Suitable applications: the water and oil separator can be directly connected to paint airbrush, air compressors and other pneumatic tools; It can be applied with airbrush, pneumatic tools and hoses, capable of capturing water vapor and oil particles entering pneumatic tools to extend tool life and provide cleaner operations, keeping your equipment performing at nice condition
Bestseller No. 7
3/4" NPT HIGH FLOW AIR PRESSURE REGULATOR & PARTICULATE FILTER WATER TRAP COMBO FOR COMPRESSED AIR COMPRESSORS
- 3/4" NPT, FILTER & REGULATOR COMBINATION WITH GAUGE & MANUAL PUSH DRAIN
- 11oz METAL BOWL AND VISIBLE SIGHT GLASS, COMES COMPLETE WITH METAL WALL MOUNT/BRACKET
- 160 CFM FLOW RATE 5 MICRON FILTER ELEMENT INCLUDED
- 225 PSI MAX INPUT PRESSURE, REGULATES PRESSURE FROM 7 - 215 PSI
Bestseller No. 8
PneumaticPlus SAU3030M-N03G Three Stage Air Drying System - Air Particulate Filter, 0.3 Micron Coalescing Filter & Air Pressure Regulator Modular Combo 3/8" NPT - Manual Drain, Poly Bowl
- Max. Supply Pressure: 250 PSI, Max Operating Pressure: 150 PSI
- SAF:10 Micron Element Stanard/ SAFM: 0.3 Micron Coalescing Filter Element
- Manual Drain & Poly Bowl with Bowl Guard/Includes 0-150 PSI Pressure Gauge & Bracket
- Filtering out of dirt and foreign particles, and the separation of moisture is automatic with air flow. There are no moving parts and no adjustments are necessary. Accumulated sludge and moisture should be drained off.
- Manufacturerd In Korea
Bestseller No. 9
Le Lematec AI303-C1 Air Compressor Filter Oil Water Separator with Push Button Drain Valve with Teflon for Air Tools and Accessories
- Le Lematec air compressor filter oil and water separator works with any air compressor and air tool. The air filter traps dirt oil and moisture as a receiving filter for air tools.
- Keep air tools in tip top working condition and prevent costly repairs by preventing dirt and moisture from damaging your air tools and accessories
- LE Lematec air dryer is a heavy duty inline air filter. Made from aluminum with solid brass fittings, it offers excellent reliability. Features a 1/4 inch air inlet “female” and 1/4” “male”.
- Air compressor dryer provides quick and easy cleaning with its push button drain valve. Just push the button to eject oil dirt and water from the filter.
- The inline air filter works under standard operating pressure of 90 PSI up to 150 PSI maximum.
Bestseller No. 10
CrocSee C1.8C.027 1/4" NPT Thread 26CFM Automatic Drain Air Compressor Compressed In Line Particulate Moisture Water Trap Filter Separator with Mount
- Max.Flow Rate: 26 CFM (750 L/Min), Particulate filtration: 40 micron
- 1/4" Female NPT Air Inlet & Outlet port
- Working Pressure: 45PSI - 145PSI, Max. Working Temperature:140°F( 60°C)
- With a wall mounting bracket(Screws are not included)
- If the item you have received is defective in any way, please message us for 100% satisfaction and RISK FREE warranty: 1 year free replacement or full refund without return.