Our Top 10 Recommendations for Air Compressor Air Dryers

Up-to-date pricing and reviews for air compressor air dryers on the market

Bestseller No. 1

The ZN312 air compressor water separator is compatible with any air compressors and air tools for convenience and cost-efficient solutions.
This filter can stop oil, water, and debris from passing through air tools that may damage the tool itself and affect the operation. It can be installed even in the most complex system and layout.
ZN312 filter has a compact design and made from zinc material with a steel push-button drain valve. It has 1/4 inch air inlet “female” and 1/4” “male” and operates at standard 90 PSI.
Push-button drain valve to quickly expel trapped dirt, oil, and water from the air compressor filter without the need to disassemble. Just press the button and remove the collected air residue.
Great inline filter for any air tool such as sandblaster, spray gun, plasma cutter, nail gun and more.

Bestseller No. 2

Max.Flow Rate: 26 CFM (750 L/Min), Particulate filtration: 40 micron
1/4" Female NPT Air Inlet & Outlet port
Working Pressure: 45PSI - 145PSI, Max. Working Temperature:140°F( 60°C)
With a wall mounting bracket(Screws are not included)
If the item you have received is defective in any way, please message us for 100% satisfaction and RISK FREE warranty: 1 year free replacement or full refund without return.

Bestseller No. 3

Eliminates water,oil,dust and particles in air line from air compressor
Mainly suitable for paint spray gun and air compressor,matched used with gun,pneumatic tools and hoses
Stops water vapor and particles from entering air tools and extends tool life
Universal 1/4"NPT inlet and outlet design easily connects air line with air tools and spray guns
Condensation exhaust valve is included in this product,Air Pressure:90 PSI

Bestseller No. 4

Bestseller No. 5

PLEASE NOTE: 1/2" NPT MEASURES 0.850" OUTSIDE THREAD DIAMETER IN INCHES. 1/2" NPT, Industrial Rated 3 Stage Combo Water Filter/ Pressure Regulator/ Coalescing Filter/ Desiccant Dryer System, With Wall Mounting Bracket And Internal Float Drain (MANUAL DRAIN) STAGE 1
150 PSI Max Input. This Unit Will Regulator Your Incoming And Outgoing Air Pressure While Removing Moisture Water, Moisture Vapor And Oil From Your Compressed Air Lines, Then Finally Drying Out The Super Clean Air With An In-Line Desiccant Air Dryer
STAGE 1: Water Trap Filter / Pressure Regulator. Equipped With 5 Micron Element To Remove 95% Of The Initial Moisture And Debris From Your Compressed Air Line. Regulator Adjusts Pressure From 7 To 150 PSI. 5oz Poly Bowl With Visible Sight Glass.
STAGE 2: Coalescing Filter Also Known As Oil Removing Filter Armed With A 0.01 Micron Element That Removes 99.98% Of Moisture, Moisture Vapor And Oil That Made Its Way Past Your Stage 1 Filter. 5oz Poly Bowl With Visible Sight Glass. Red Indicator Pops Up When Time For Filter Change.
STAGE 3: Desiccant Air Dryer, Dries Out Your Super Clean Air Before Going Downstream To Your Air Tools. Uses 5oz Desiccant Beads In The Bowl. Beads Turn From Blue To Pink When Time To Change. Unit Comes With 2 Bags Desiccant Beads.

SaleBestseller No. 6

Pack of 2 premium mini in-line air filters. Separates and removes oil, water and dirt
Use for compressor air lines, air tools, spray guns
Clear reservoir shows accumulated contaminants
Push button drain release valve
1/4" air inlet and outlet

Bestseller No. 7

Reduced energy use: efficient heat exchangers, a built-in stainless steel demister that removes all moisture and a fully adjustable programmable electronic drain valve reduce energy use and minimize air loss
Built-in Reliability: corrosion-resistant heat exchangers, an enhanced control-system and high-efficiency moisture-separation ensure a steady long-term supply of dry air
Smart control: easy to use, Advanced microprocessor control that lets you easily adjust and manage system parameters
Consistent clean, dry air: variable-speed fans reduce power consumption when units operate at less than maximum cooling capacity, while ensuring a consistent Dew point

Bestseller No. 8

Bestseller No. 9

3/4" NPT, INDUSTRIAL RATED 3 STAGE COMBO WATER FILTER/ PRESSURE REGULATOR/ COALESCING FILTER/ DESICCANT DRYER SYSTEM, WITH WALL MOUNTING BRACKET AND MANUAL DRAIN STAGE 1
225 PSI MAX INPUT. THIS UNIT WILL REGULATOR YOUR INCOMING AND OUTGOING AIR PRESSURE WHILE REMOVING MOISTURE WATER, MOISTURE VAPOR AND OIL FROM YOUR COMPRESSED AIR LINES, THEN FINALLY DRYING OUT THE SUPER CLEAN AIR WITH AN IN-LINE DESICCANT AIR DRYER
STAGE 1: WATER TRAP FILTER / PRESSURE REGULATOR. EQUIPPED WITH 5 MICRON ELEMENT TO REMOVE 95% OF THE INITIAL MOISTURE AND DEBRIS FROM YOUR COMPRESSED AIR LINE. REGULATOR ADJUSTS PRESSURE FROM 7 TO 215 PSI. 5oz METAL BOWL WITH VISIBLE SIGHT GLASS.
STAGE 2: COALESCING FILTER ALSO KNOWN AS OIL REMOVING FILTER ARMED WITH A 0.01 MICRON ELEMENT THAT REMOVES 99.98% OF MOISTURE, MOISTURE VAPOR AND OIL THAT MADE ITS WAY PAST YOUR STAGE 1 FILTER. 5oz METAL BOWL WITH VISIBLE SIGHT GLASS. RED INDICATOR POPS UP WHEN TIME FOR FILTER CHANGE.
STAGE 3: DESICCANT AIR DRYER, DRIES OUT YOUR SUPER CLEAN AIR BEFORE GOING DOWNSTREAM TO YOUR AIR TOOLS. USES 5oz DESICCANT BEADS IN THE BOWL. BEADS TURN FROM BLUE TO PINK WHEN TIME TO CHANGE. COMES WITH 2 BAGS OF DESICCANT BEADS.

SaleBestseller No. 10

Max Supply Pressure: 250 PSI, Max Operating Pressure: 140 PSI, 16 SCFM @ 90PSI
Particulate Filter: 5 Micron Element, Coalescing Filter: 0.3 Micron Element, Port Size:1/4" NPT
Manual Drain & Poly Bowl with Guard, Includes 0-140 PSI Embedded Pressure Gauge
Use metal bowl in pressure exceeding 150PSI or when solvents harmful to polycarbonate is present
Manufactured in Korea